SGI Onyx 2 Deskside
Location: /hw/module/1/slot/n1/node
MODULEID Board: barcode K0009837 part rev
Group ff Capability ffffffff Variety ff Laser 00000092f4ac
4P1G5_MPLN Board: barcode DKA301 part 013-1839-001 rev E
Group ff Capability ffffffff Variety ff Laser 000000158be4
IP27PIMM Board: barcode GCF752 part 030-1313-002 rev B
Group ff Capability ffffffff Variety ff Laser 0000002a0563
IP27 Board: barcode HTY396 part 030-1255-003 rev D
Group ff Capability ffffffff Variety ff Laser 000000343efb
Location: /hw/module/1/slot/io4/kona
GE14-2 Board: barcode DZV164 part 030-1051-002 rev B
Group ff Capability ffffffff Variety ff Laser 000000125ef7
Location: /hw/module/1/slot/io1/baseio
MIO Board: barcode FEM250 part 030-0880-003 rev E
Group ff Capability ffffffff Variety ff Laser 0000001698cc
BASEIO Board: barcode ENX311 part 030-0734-002 rev B
Group ff Capability ffffffff Variety ff Laser 0000000c5f61
2 195 MHZ IP27 Processors
CPU: MIPS R10000 Processor Chip Revision: 3.4
FPU: MIPS R10010 Floating Point Chip Revision: 3.4
Location: /hw/module/1/slot/n1/node/cpubus/0/a
CPU 0 at Module 1/Slot 1/Slice A: 195 Mhz MIPS R10000 Processor Chip (enabled)
Processor revision: 3.4. Scache: Size 4 MB Speed 130 Mhz Tap 0x9
Location: /hw/module/1/slot/n1/node/cpubus/0/b
CPU 1 at Module 1/Slot 1/Slice B: 195 Mhz MIPS R10000 Processor Chip (enabled)
Processor revision: 3.4. Scache: Size 4 MB Speed 130 Mhz Tap 0x9
Main memory size: 768 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Location: /hw/module/1/slot/n1/node/memory
Memory at Module 1/Slot 81: 768 MB (enabled)
Bank 0 contains 256 MB (Standard) DIMMS (enabled)
Bank 1 contains 128 MB (Standard) DIMMS (enabled)
Bank 2 contains 128 MB (Standard) DIMMS (enabled)
Bank 3 contains 64 MB (Standard) DIMMS (enabled)
Bank 3 contains 64 MB (Standard) DIMMS (enabled)
Bank 3 contains 64 MB (Standard) DIMMS (enabled)
Bank 3 contains 64 MB (Standard) DIMMS (enabled)
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Disk drive: unit 3 on SCSI controller 0 (unit 3)
Disk drive: unit 4 on SCSI controller 0 (unit 4)
Disk drive: unit 5 on SCSI controller 0 (unit 5)
CDROM: unit 6 on SCSI controller 0
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3 parallel port: plp1
Graphics board: Reality
Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
Iris Audio Processor: version RAD revision 7.0, number 1
Origin MSCSI board, module 1 slot 5: Revision 4
PCI Adapter ID (vendor 4215, device 4128) PCI slot 0
PCI Adapter ID (vendor 4215, device 4128) PCI slot 1
PCI Adapter ID (vendor 4215, device 4128) PCI slot 2
PCI Adapter ID (vendor 4215, device 4128) PCI slot 3
Origin BASEIO board, module 1 slot 1: Revision 3
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 6
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 7
IOC3/IOC4 external interrupts: 1
Location: /hw/module/1/slot/n1/node/hub
HUB in Module 1/Slot 1: Revision 5 Speed 97.50 Mhz (enabled)
Location: /hw/module/1/slot/n1/node/prom
IP27prom in Module 1/Slot n1: Revision 6.156
Location: /hw/module/1/slot/io1/baseio
IO6prom on Global Master Baseio in Module 1/Slot io2: Revision 6.156
|